The D52 is designed for use in mining, manufacturing and construction, where the concentration and variability of airborne dust particles (PM1.0, PM2.5 & PM10.0) pose significant operational and health risks.

REAL-TIME MONITORING & REPORTING

• Easy to read data readings and range limits display on an LCD-display: Time-weighted average (TWA) and particulate matter measured for 1μm, 2.5μm, and 10μm.

 CONFIGURABLE WIRED/WIRELESS REPORTING

• SCADA Software enabled, including particulate matter readings per field unit and dust size grouping
• Site-specific and remote connection options
• Reliable data transfer via wired or wireless options:
  • Wired: RS485 (Modbus-RTU)
  • Wireless: IoT Network, Private 5G, GSM
• Configurable to activate automated ventilation and dust suppression systems
• Response time: <60 seconds

ACCURATE & CONNECTED

• IoT-enabled with wireless and wired data transfer
• Compatible with automated dust suppression and ventilation systems
• Dust impactor and cyclone separation for enhanced accuracy

The S50 guarantees reliable early smoke and fire detection. Its easy integration activates an automatic fire suppression system to safeguard people, the environment and your assets. MOS, SO₂, CO, CO2, VOC sensing.

REAL-TIME MONITORING & FALSE ALARM DISCRIMINATION

• Accurate, real-time, in-field measurements of hazardous gas ambient temperature and humidity
• Follows NIOSH standards to reduce false alarms (Unlike traditional systems that rely on ionization or optical sensor

 CONVEYER BELT WEAR DETECTION

• Achromatic detection: Proactive SO₂ and CO monitoring from high heat production caused by belt degradation, enabling early intervention before significant damage or risks arise.

MULTI-SENSING CAPABILITIES

• MOS, SO₂, CO, CO2, VOC, Temperature, Relative Humidity

AUDIBLE & VISUAL ALERTS

• 16 x 2 OLED Display to easily see measurements
• 360° Configurable RGBY Strobe light to indicate alarm and no alarm

BATTERY BACK-UP

• Built-in battery back-up (up to 8 hours)
• Automatic charging when connected to a supply line

USER-FRIEDNLY & ROBUST

• IP65 Rated (water & dust tight)
• Operating temperatures range from -20°C to 70°C
• Easy to install

WIRELESS/WIRED COMMUNICATION

• RS485, Modbus-RTU
• IoT
• Private 5G Enabled
• Built on open-integration standards

The DPM50 measures and analyzes diesel particulate matter (CO2, SOx, EC, PAH, NOx, VOC, O2, 03, CO, PM1, PM2.5, PM4, PM10, EC) emissions from diesel engines.: a significant concern due to their potential health and environmental impacts.

SMART LASER SENSING

• Intelligent laser particle counting for PM1.0, PM2.5, PM10
• Real-time data on TWA (time-weighted average)

USER-FRIENDLY & LOW MAINTENANCE

• Self-cleaning, minimal maintenance (no pumps or filters)
• No user-serviceable parts – designed for long life and low service requirements
• Integrated 5” colour TFT LCD-display with visual indicators
• User-friendly SCADA interface with real-time monitoring
• Mobile and fixed installation options

ACCURATE & CONNECTED

• IoT-enabled with wireless and wired data transfer
• Compatible with automated dust suppression and ventilation systems
• Dust impactor and cyclone separation for enhanced accuracy

The P511  is our state of the art air velocity monitor, offering precise digital wind-speed measurements, with audible and visual indications and alerts.

REAL-TIME MEASUREMENTS

• Accurate: real-time air-velocity measurements
• Response time: non-IS & Mains: 30 sec, EX ia:120 sec
• Sensor range: 0 to 10m/s
• Operating range: 0 to 10m/s

ACCURATE & CONNECTED

• Precise digital wind-speed measurements

AUDIBLE & VISUAL ALERTS

• Optional Audible (93dB) alert at configurable, pre-set levels
• 360° Red red (alarm) and green (no alarm) light indication on device

ROBUST 

• Platinum sensors for long-term reliability in harsh environments
• Operating temperatures range from -10°C to 50°C

WIRELESS/WIRED COMMUNICATION

• RS485, Modbus-RTU
• IoT
• Private 5G Enabled
• Built on open-integration standards