ENVIRONMENTAL MONITORING
DUST MONITOR – D52
D52
Designed for use in environments where the concentration and variability of airborne dust particles pose significant operational and health risks.
Using intelligent laser sensing technology, the D52 continuously measures fine particulate matter (PM1.0, PM2.5, PM10, and PM Total) and reports the data wirelessly to the control room, making dust management easy to keep employees safe from risks of fine particulate matter exposure that can cause chronic respiratory illnesses.
PRIORITIZE RESPIRATORY HEALTH
REAL-TIME DATA TRANSFER
IOT ENABLED
QUICK RESPONSE TIME
DUST SUPRESSION SYSTEM AUTO ACTIVATION
ENVIRONMENTAL MONITORING
DUST MONITOR D52
SMART LASER SENSING
- Intelligent laser particle counting for PM1.0, PM2.5, PM10
- Real-time data on TWA (time-weighted average)
USER-FRIENDLY & LOW MAINTENANCE
- Self-cleaning, minimal maintenance (no pumps or filters)
- No user-serviceable parts – designed for long life and low service requirements
- Integrated 5” color TFT LCD display with visual indicators
- User-friendly SCADA interface with real-time monitoring
- Mobile and fixed installation options
ACCURATE & CONNECTED
- IoT-enabled with wireless and wired data transfer
- Compatible with automated dust suppression and ventilation systems
- Dust impactor and cyclone separation for enhanced accuracy
- Detection Range: 0.30 µm to 10 µm
- Measurement Outputs: PM1.0, PM2.5, PM10, and PM Total
- Detection Limits (PM10): 0.01 to 1000 µg/m³
- Software Bins: 4 programmable measurement bins
- Response Time: < 60 seconds
- Sensor Calibration: Factory calibrated to default, with option for OEM recalibration cycles
|
PARAMETER |
VALUE / RANGE |
|
Sensor Type |
Laser optical sensor |
|
Measurement Range |
0.3 – 10 µm |
|
Response Time |
< 60 seconds |
|
Power Supply Options |
9–20 VDC (Ex ia), 9–48 VDC, 85–265 VAC |
|
Operating Temperature |
-20 °C to 50 °C |
|
Ingress Protection |
IP65 |
|
Communications |
RS485 Modbus RTU, 802.15.4 Zigbee, IoT, Wi-Fi (802.11 b/g/n), GSM |
|
SCADA Interface |
M3SH-provided SCADA drivers & register map |
|
Display |
5” Color TFT LCD with visual indicators |
|
Mounting Options |
Roof bolt (hook) or wall-mount (Fischer plugs) |
|
Weight |
Approx. 5 kg |
STANDARD CERTIFICATIONS
- SANS (IEC) 60079-0:2012 – General Requirements for Equipment for Explosive Atmospheres
- ISO 13849-1:2015 – Safety of Machinery – Functional Safety
- IEC 61508 – Functional Safety of Electrical/Electronic/Programmable Electronic Safety-Related Systems
- Certified for Group II (Surface Applications)
- Certification Number: MASC M/17-0059X
- Ingress Protection: IP65
ADDITIONAL CERTIFICATIONS
Available on request for specific hazardous area applications:
- SANS (IEC) 60079-11:2012 – Intrinsic Safety “i”
- Explosion Protection Marking: Ex ia I Ma (-20°C to +55°C)
- Certified for Group I: Underground Mines including coal
-
MINING
-
MANUFACTURING
-
CONSTRUCTION
RELATED PRODUCTS
DPM50 | DIESEL PARTICULATE MONITOR
QUICK OVERVIEW
The DPM50 measures and analyzes diesel particulate matter (CO2, SOx, EC, PAH, NOx, VOC, O2, 03, CO, PM1, PM2.5, PM4, PM10, EC) emissions from diesel engines.: a significant concern due to their potential health and environmental impacts.
SMART LASER SENSING
- Intelligent laser particle counting for PM1.0, PM2.5, PM10
- Real-time data on TWA (time-weighted average)
USER-FRIENDLY & LOW MAINTENANCE
- Self-cleaning, minimal maintenance (no pumps or filters)
- No user-serviceable parts – designed for long life and low service requirements
- Integrated 5” colour TFT LCD-display with visual indicators
- User-friendly SCADA interface with real-time monitoring
- Mobile and fixed installation options
ACCURATE & CONNECTED
- IoT-enabled with wireless and wired data transfer
- Compatible with automated dust suppression and ventilation systems
- Dust impactor and cyclone separation for enhanced accuracy
S50 | EARLY SMOKE & FIRE DETECTOR
QUICK OVERVIEW
The S50 guarantees reliable early smoke and fire detection. Its easy integration activates an automatic fire suppression system to safeguard people, the environment and your assets. MOS, SO₂, CO, CO2, VOC sensing.
REAL-TIME MONITORING & FALSE ALARM DISCRIMINATION
- Accurate, real-time, in-field measurements of hazardous gas ambient temperature and humidity
- Follows NIOSH standards to reduce false alarms (Unlike traditional systems that rely on ionization or optical sensor
CONVEYER BELT WEAR DETECTION
- Achromatic detection: Proactive SO₂ and CO monitoring from high heat production caused by belt degradation, enabling early intervention before significant damage or risks arise.
MULTI-SENSING CAPABILITIES
- MOS, SO₂, CO, CO2, VOC, Temperature, Relative Humidity
AUDIBLE & VISUAL ALERTS
- 16 x 2 OLED Display to easily see measurements
- 360° Configurable RGBY Strobe light to indicate alarm and no alarm
BATTERY BACK-UP
- Built-in battery back-up (up to 8 hours)
- Automatic charging when connected to a supply line
USER-FRIEDNLY & ROBUST
- IP65 Rated (water & dust tight)
- Operating temperatures range from -20°C to 70°C
- Easy to install
WIRELESS/WIRED COMMUNICATION
- RS485, Modbus-RTU
- IoT
- Private 5G Enabled
- Built on open-integration standards
P50 | MULTI-ENVIRONMENTAL MONITORING
QUICK OVERVIEW
The P50 is an advanced multi-functional, multi-sensor device that monitors environmental factors (CO2, CO, CH4, VOC, humidity, air velocity, Ambient Temperature), especially in extreme and hazardous environments (explosives and gaseous atmospheres).
REAL-TIME MONITORING & FALSE ALARM DISCRIMINATION
- Accurate, real-time, in-field measurements of hazardous gas ambient temperature and humidity
- Follows NIOSH standards to reduce false alarms (Unlike traditional systems that rely on ionization or optical sensor
CONVEYER BELT WEAR DETECTION
- Achromatic detection: Proactive SO₂ and CO monitoring from high heat production caused by belt degradation, enabling early intervention before significant damage or risks arise.
MULTI-SENSING CAPABILITIES
- MOS, SO2, CO, CO2, VOC, Temperature, Relative Humidity
AUDIBLE & VISUAL ALERTS
- 16 x 2 OLED Display to easily see measurements
- 360° Configurable RGBY Strobe light to indicate alarm and no alarm
BATTERY BACK-UP
- Built-in battery back-up (up to 8 hours)
- Automatic charging when connected to a supply line
USER-FRIEDNLY & ROBUST
- IP65 Rated (water & dust tight)
- Operating temperatures range from -20°C to 70°C
- Easy to install
WIRELESS/WIRED COMMUNICATION
- RS485, Modbus-RTU
- IoT
- Private 5G Enabled
- Built on open-integration standards
P511 | AIR VELOCITY MONITORING
QUICK OVERVIEW
The P511 is our state of the art air velocity monitor, offering precise digital wind-speed measurements, with audible and visual indications and alerts.
REAL-TIME MEASUREMENTS
- Accurate: real-time air-velocity measurements
- Response time: non-IS & Mains: 30 sec, EX ia:120 sec
- Sensor range: 0 to 10m/s
- Operating range: 0 to 10m/s
ACCURATE & CONNECTED
- Precise digital wind-speed measurements
AUDIBLE & VISUAL ALERTS
- Optional Audible (93dB) alert at configurable, pre-set levels
- 360° Red red (alarm) and green (no alarm) light indication on device
ROBUST
- Platinum sensors for long-term reliability in harsh environments
- Operating temperatures range from -10°C to 50°C
WIRELESS/WIRED COMMUNICATION
- RS485, Modbus-RTU
- IoT
- Private 5G Enabled
- Built on open-integration standards
NM20/60 NOISE MONITORING
QUICK OVERVIEW
The NM20/NM60 offer flexible and scalable noise monitoring networks to reduce long-term health effects caused by long-term noise exposure. Visual and audio alerts make quick response times easy.
REAL-TIME MONITORING
- Real-time sound level measuring and reporting for up to 10 NM20 sensors
- 8-Hour time-weighted average tracking
AUDIBLE & VISUAL ALERTS (IN-FIELD)
- Optional Audible (93dB) alert at configurable, pre-set levels
- 360° Red red (alarm) and green (no alarm) light indication on device
ROBUST
- Platinum sensors for long-term reliability in harsh environments
- Operating temperatures range from -10°C to 50°C
WIRELESS/WIRED COMMUNICATION
- RS485, Modbus-RTU
- IoT
- Private 5G Enabled
- Built on open-integration standards
